Skip to main content

Getting to Know More About Cars

I've written before on everything I know about cars which is a lot more than some but no trained mechanics will be shaking in their boots any time soon. In fact quite a few backyard mechanics kick sand in my face too (metaphorically speaking of course).

My vehicle, known as the frog van, recently renamed the old boiler in this Barossa Festival post, has finally succumbed to its overheating problems to the point where I had to do something about it.

I tried to fix it the day before we went to see the Vintage Festival Parade at the town of Nuriootpa. I was thinking it may be a thermostat issue. After much research and consideration about where the thermostat actually was on my van I pulled things apart and did the 'boiling water' test to see if the thermostat would open. It did. Crap!

Essentially that meant I'd wasted a bottle of coolant (which had only been in the engine less than a week), had to replace a perfectly fine thermostat gasket and not found the overheating problem. Still, I now know more about car thermostats and how they work.

That was my last best guess at the problem because the cooling system wasn't leaking or losing water (except to evaporation and the overflow pipe as a result of it overheating). After that I figured it might be a water pump issue but I'm definitely not up for pulling that out. As well I couldn't help feeling that if the water is boiling in the radiator then the water pump must be working because the radiator removes heat from the engine it doesn't actually heat anything up its self.

So I bit the bullet and went in to see a proper mechanic. Described the problem - van overheats at 60kmph or greater but the temperature remains relatively stable at lower speeds during shorter drives.

The mechanic said it sounds like a blocked radiator. Of course! Well I believed him anyway because that sounds cheaper and easier to fix than a water pump. It seems mechanics in my home town are all backed up with work no matter where you go. This guy was no different but suggested I take the van to a specialist radiator mechanic on the other side of town (not that far when you live in a small country town).

When I got to the radiator guy he seemed to concur with the mechanic after I told him the van wasn't leaking. Seemed promising. I asked him when he could take a look at it - he said Thursday (3 days time). Then he asked "Are you able to take the radiator out?"

"Err... well no because I have to drive it here."

"Well we can't look at it unless you take the radiator out yourself because we don't like working on vans. Too fiddly and you have to crawl all around and underneath them - plus it'll save you some money."

You know I might have gone somewhere else if he hadn't of said "plus it'll save you some money".

You might think his attitude to vans is a crock but if you've ever worked on a van engine... I don't blame him.

The frog van's engine is right under the passenger seat. To get the radiator out you have to pull out the drivers seat, remove a panel so you can see more of the engine then crawl under the front to remove the four bolts that hold the radiator in place. See the photo of the van parked in my studio - drivers seat and radiator removed.

It is pretty tricky and I've never taken out a radiator before so I know how to do that now.

Visually, you can't really tell if a radiator is blocked. You can look in from where the radiator cap goes at the top to see a few of the pipes but that doesn't really tell you much. Externally it's got a bit of mud caked into the core but it's all old mud that was there long before the van started overheating (we're talking previous owner old because I've not really driven on anything except sealed roads).

At the moment the frog van is out of action. At the time of writing this there's still two days to go before I can take the radiator in to get it fixed, cleaned and unblocked (or re-cored even). I just hope this will solve the problem.

Over the next few days I suspect I'm going to be learning even more about cars. The van has a fairly serious 'running on' problem. For the uninitiated that's where you turn the engine off via the key and the car keeps running until it runs out of fuel in the cylinder heads.

It's not so bad most of the time but again, after a long drive, it can run on for quite some time requiring me to put the car in gear to 'stall' the engine.

Should you be reading this and you know how to fix that kind of problem please let me know in the comments. You'll be doing me a great favor and who knows, I may just write about you in this continuing saga of the frog van.

Comments

  1. I don't like where the engine is - right under the passenger seat! That puts it right inside the van too, only encased underneath. Wouldn't like the engine to set on fire!

    Shouldn't it be out front directly under the bonnet like other cars - mostly? (I don't know anything about cars either if this seems a dumb question!)

    How are you going to get it there? Hope it gets fixed properly, and the 'running on' problem, as this is going to waste petrol isn't it? (another dumb question maybe!)

    Don't think about using hills and long drives until it's fixed properly1 I think you said that you had some retreads put on, so hope they're not getting too worn with all the travelling.

    ReplyDelete
  2. I just took another look at the picture of your van, and see it hasn't got a bonnet! Silly me! LOL! Could have sworn I've seen vans with bonnets! (perhaps not!)

    Aren't these mechanics supposed to 'crawl around and go underneath' when they are fixing cars etc! I thought it came with the job! Maybe it's because he's a radiator specialist! Perhaps the first mechanic suggested this so he didn't have to 'crawl around and underneath' etc!

    Hope he was genuinely doing you a favour, and the specialist bloke.

    ReplyDelete
  3. Some vans do have a kind of bonnet, engine cavity area in the front - though nothing like the length of a car bonnet. I still think the bulk of the engine is probably still under the seats though (that's why you sit so high up in a van compared to a car).

    With the seats down there is a kind of fire wall to protect you should the engine catch fire but you'd want to get out pretty quick all the same.

    The particular radiator mechanic I went to doesn't have a hydraulic lifter (car hoist) thingy so you can just walk underneath - hence that could be why he's not a fan of working on a van. Not to worry. The more I work on stuff the more confident I get about fixing my own engine troubles.

    I ended up walking to the radiator place carrying the radiator from a strap over my shoulder. It's not that heavy or large so wasn't much of a problem.

    ReplyDelete

Post a Comment

Comments are moderated by an actual human (me, TET) and may not publish right away. I do read all comments and only reject those not directly related to the post or are spam/scams (I'm looking at you Illuminati recruiters... I mean scammers. Stop commenting on my Illuminati post!).

Buy Gifts and Apparel featuring art by TET.

Popular posts from this blog

I'm Confused About Why People Prefer to Say Discombobulated?

D iscombobulated. Is a word that I think someone rediscovered about three or four years ago (maybe more because the pandemic years have thrown out my sense of time) and now I hear it a lot. It's not a new word by any means, but when I started hearing multiple celebrities using it in everyday sentences, I actively had to look up what it meant. Define it with as many synonyms as you like but essentially it's just another word meaning 'confused'. Seinfeld Quotes: Quotes.net The words are pretty much interchangeable. He was discombobulated by too many choices. He was confused by too many choices.  My confusion is the length of the word. It's unnecessarily long with too many syllables. There are many other words that mean confused, and therefore also mean discombobulated. Most of them are shorter and easier to say. So why not just say 'confused'? Perhaps discombobulated sounds more intelligent, maybe?  Hawaii Five-0 Quotes: Quotes.net I've noticed it gets us...

The Princess' Butterflies - Using an AI Image to Video Generator to Animate Art That Started as a 23 Year Old Rough Pen Sketch

B ack in October of 2023 I used Prome AI's Sketch Rendering feature to color a 23 year old rough pen sketch I did of a princess watching butterflies, sitting next to a waterfall in the forest. You can read more about that in my previous article,  The Princess' Butterflies - Using an AI Art Generator to Color and Enhance a 23 Year Old Rough Pen Sketch The three images I used to create my final image (bottom right). Notice how closely the AI has followed my line art sketch (top left) but in the first image (top right) has misinterpreted the waterfall as some kind of large tree stump. Prome's render of the artwork was pretty good but I did end up creating a composite image myself from two of the best renders, to get my final image. Since then AI Image to Video has come a long way, particularly when it comes to creating animation from artwork and maintaining the art style for the whole generation. AI still does much better with turning photographic images to video but I found ...

Second Sunday Skateboard Session Ep 2 - Some Improvements

TET heelflip - looking better but still not a land. A s of writing this I've stuck to my plan of filming myself skate every second Sunday. By the time this post goes up I will have three episodes done. As part of that goal I am also skating more between episodes, about every second to third day for an hour, practicing Braille's Skateboarding Made Simple, Volume 1. That said, I'm not posting these videos here immediately after they're posted to my @TETLife YouTube Channel because I only post an article once a week, and that would make every second article a Sunday Session post. These posts are really so I can add some additional thoughts after the fact, and, of course, because this blog is about all things that interest me, of which skateboarding is one of them. In episode two I had intended to speak to camera more than I do but my driveway is right next door to my neighbor's shed/workshop, and I get a little self-conscious if I'm not too sure whether he's th...

Australian Federal Election 2025 - The Australian Democrats (Please Like Us Again) and The Greens

Image: Reve AI T here's not much to be said about the current Australian Democrats other than in 2025 Australian election, in May, they'll be out there hoping they win a seat... any seat... 'please like us again!' The Australian Democrats For just over two decades, from the late seventies onward, the Australian Democrats were the third most important party in the Federal government (if you don't count the National party since they've been on that coalition ticket with the Liberals for as long as I can remember). In fact, once I moved away from the Labor party, they were my top pick until the party slowly imploded in the early 2000's from a series of unfortunate events like leaders defecting to other parties, and a highly publicised incident of drunkenness, bullying, and abuse from a male party leader to a female colleague. It's been two decades since then (and that guy's with the Greens now)... please like us again! That aside, the party is still t...

The Australian Federal Election 2025 Could Be a Win For Independents

Australian Democrats founder, Senator Don Chipp, embodied the role of minor parties holding the balance of power with his quote of "keep the bastards honest." Photo Manipulated Caricature by TET. A s of writing this, the actual Australian Federal Election date has yet to be announced, as our Prime Minister, Anthony Albanese, attempts to keep the focus on the fallout of severe weather events in Queensland, however it's looking likely that some time in May is the safest bet. Despite this, all parties have been hard at campaigning, with smaller parties, and in particular, conservative independent candidates, seemingly rallying together to make sure people know how much influence they can have just by preventing the two major parties (Labor and the Liberal/National coalition) from having a majority in either (or both) houses of parliament. They're also doing their part to make sure voters finally understand that preferential voting works in everybody's favor over one ...

Boom Crash Opera Born Classic But Not Again

Boom Crash Opera are an Australian Band that reached the peak of their popularity in the mid to late nineteen eighties. They are a band that I knew about at that time but was never really excited by until they released their ill fated double album Born and Born Again in 1995 (Album cover pictured). At the time of its release I was very much into emerging Australian musical acts and was also looking out for new sounds that were different and had kind of a futuristic/electronic sound. Artists that I was buying at the time included; Swoop , Nine Inch Nails and Pop Will Eat Its Self . As well as a really interesting release by David Bowie, the concept album, Outside . Born was a fairly radical departure for Boom Crash Opera (BCO). The first single, Gimme , was often compared to the sounds of Gary Glitter, particularly his single, Rock n Roll part 2 , because of the pounding drum loops. Watch the video below. My favorite single from the album is dissemble which probably went now...

Making an Effort to Be a President Trump Free Zone - Final Rant (I Hope)

I  hope the American people, who voted for President Trump, get the full experience of what they thought they voted for along with what they're actually getting.  Now may be a good time for them to learn to speak Russian because if World War Three does break out, it's not beyond possibility that it'll be the USA and Russia against the rest of the world, as Trump appears to be emboldening Russia to dig in on their attack on the Ukraine. China, may opt to stay neutral, or even join forces with the rest of the world because they've been quietly winning an economic war with so many countries, they may not care so much about the USA. Especially since President Trump wants to bring manufacturing back to America and impose tariffs on every country exporting anything to the USA. After that fiasco meeting President Zelenskyy had in the Oval Office with President Trump I've pretty much had enough. I'm not writing about what new dumb ass thing Trump's doing this week. ...